Header

Strap line

ca-protection

 

QMP™/QMP-R™ Pan & Tilt Mobile Positioner Series

QMPDesigned and built to endure the harshest mobile or stationary environments, the QMP™ design enables simple integration into existing QPT systems and allows for various platform mounting applications.

QMPRThe QMP-R™ supports radar or other payloads that can be independently positioned from the Pan & Tilt. 

Available Features

  • RF Pass-thru turret
  • Balanced payloads; up to 300 lbs static and
  • 150 lbs mobile installations
  • Unbalanced payloads up to 90 lbs
  • Fixed or Mobile Installations
  • Mil-Spec Connectors
  • Marine configuration that meets IP-67 standards
  • Universal wiring for sensor integration
  • Thermostatically controlled heaters


Sensor Integration

  • Radar Antenna Systems
  • Multi-Spectrum Cameras (Visible/NIR/SWIR)
  • IR and Visible Illuminators
  • Laser Range Finders
  • Communication Antennas
  • Acoustic Devices

 

 

 

 

 

Standard Performance 

Load Capacity Static installation - 300 lbs (136 kg) balanced
Mobile installation - 150 lbs (68 kg) balanced
Operating Voltage Range  24VDC (±4VDC)
Total Power  Pan & Tilt Axes: 2.6A pk, 2.0A continuous at 24VDC
Heater: 4.4A at 24VDC
Standby: 0.5A at 24VDC (no heater current)
Pan-Axis Range  360° continuous rotation (slip ring)
Pan-Axis Speed 0.005° - 30°/sec
Tilt-Axis Range  180° (±90°) 
Tilt-Axis Speed  0.005° – 8° 
Internal Heater  Thermostatically controlled 0°C on/1.7°C off (32°F on/35°F off) 
Operating Temperature  -15°C to 55°C (without heater)  5°F to 131°F (without heater)
-30°C to 55°C (with heater)  -22°F to 131°F (with heater)
Rotational Limits  Fixed tilt hard limit, adjustable soft limits on both axes
Feedback  Optical Encoders (0.01° readout)
Repeatability 0.1°
Duty Cycle  20%
Motor Type/Drive  Stepper 
Communication to Pan & Tilt  RS232/422/485, IP Ethernet: 10/100 Base-T 
Communication to Sensors RS232/422, Ethernet Pass-Through 
Control Protocol  QuickSet or Pelco D 
Connector Specifications Mil-Spec grade used on all configurations
Load Connector Interfaces 2 Mil-Spec connectors on each tilt axis platform
Materials  Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings. 
Finish/Color  White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Weight  94 lbs (43 kg)
Dimensions  See page 3
Test Cable and Software 6 ft test cable and software include

 

 

Environmental Testing Performance 

Vibration SVertical, Longitudinal and Lateral Passed
Mechanical Shock Passed

Note: Environmental testing procedures in accordance with MIL-STD-810F; HMMWV Shock and Vibration parameters

 

Dimensions

dimensions