GeminEye™ Modular Imaging System

The demand for high performance day/night surveillance is pressing for smaller, smarter, less expensive products. At the same time, the environments in which imaging products must function are increasingly hostile. Responding to this demand, Moog QuickSet developed the GeminEye™ modular imaging system. GeminEye embraces high performance in a small package, and it is designed to be configured for different applications.

Based on our new QPT-LT dual side-mount positioner, it can be configured with single or dual camera blocks for day, night or day/night capability. Various wavelength band sensors and illuminator modules are available. Moog QuickSet queried its extensive customer base, formed over thirty years in the security industry, for a “clean sheet” specification of all salient characteristics needed for creation of the GeminEye.

As a system, GeminEye is completely upgradable with image blocks swappable by the user in the field. Let the GeminEye surveillance system be an important part of your complete security solution.




Available Features

  • Compact/ light weight
  • Quick-change camera modules (blocks) with trueplug ‘n play performance
  • Network controllable or dedicated (UniCom®LT) controller
  • Single universal protocol, unaffected by camera changes
  • Mil-STD-810F, IP67 (Certified), sealed and pressurizedcamera housings
  • Random vibration (M56) resistant, Salt/Fog MIL-STD-810F, Meth. 509.4
  • 10-30 VDC operations
  • Choice of multi-spectral cameras
  • Continuous Pan rotation
  • Mobile or inverted operation
  • No exposed wiring
  • Full two-way communication
  • Mounting kits
  • Illuminators with Quick-Site™ boresight mechanism

Sensor Integration

  • Visible Spectrum Cameras
  • Thermal Imagers
  • Illuminators



  • Force Protection
  • Perimeter Direction
  • Emergency Vehicle Situational Awareness
  • UGV Navigational Aid
  • Port & Ship Safety and Security
  • Mobile Surveillance Systems
  • Remote Surveillance
  • Municipal and Utility Surveillance
  • And Numerous Others



Operating Voltage 10 to 30 VDC with reverse polarity protection.
Total Power Pan & Tilt Axes: 2.5A pk, 1.2A continuous at 24VDC
Heater: 3.0A at 24VDC
Standby: 0.45A at 24VDC (no heater current)
Pan Range 360° continuous
Pan Speed  0.25˚ – 100˚/sec 
Tilt Range ±95˚
Tilt Speed 0.25˚ – 60˚/sec 
Limits  Fixed tilt hard limit, adjustable soft limits 
Motor Type/ Drive  Stepper motor drive
Connector Mil spec, bottom egress 
Weight  Approximately 22lbs (10kg) with dual cameras
Microprocessor Control  32 presets and 2 preset tours 
Control Protocols QuickSet or Pelco D 
Serial Communication RS422/RS485, IP
Repeatability 0.25˚
Materials  Housing Cast Aluminum, stainless steel hardware, permanently sealed radial ball bearings. 
Finish  White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Enclosures  IP67, sealed and pressurized camera housings
Operating Temperature Range  -40˚ to 122˚F (-40˚ to 50˚C)
Heaters  Pan & Tilt: 25W (2), Camera(s): 10W (each camera)
Thermostatically controlled: 32°F on/35°F off
Position Feedback Resolution and Readout 0.01˚
Optional Features Side mount “L” brackets for customer payload
CE compliance
Other accessories available